Great weather protection impregnation for glazing and sealing of self-created work pieces
The solvent-free impregnation can be applied, for example, to self-cast and modelled workpieces made of plaster, concrete, cardboard, wood or creative casting compounds. This colourless transparent varnish is very well suited as a final finish and should be applied in two layers with a brush. This way your castings have a permanent seal and protection against dirt and moisture, they become weatherproof and resistant to weathering. No primer is necessary for this varnish.
Note:
The workpieces should not be left outside in frosty conditions.
Tips to use:
Applicable to:
Apply with:
Preparations:
Processing of material:
Time to dry:
Work to finish:
This is to be noted:
Tips to use:
Applicable to: Wood, plaster, concrete, creative casting compounds (cured).
Apply with: Brush.
Preparations: The surface to be treated must be dry, free of dust and grease.
Processing of material: Ideally apply at least 2-3 times and allow to dry well between the work steps. This allows the impregnation to develop its full effect.
Time to dry: 40 minutes.
This is to be noted: It is a very watery, odourless impregnation, which can therefore penetrate particularly deeply into the pores.
Tips to use:
Applicable to:
Apply with:
Preparations:
Processing of material:
Time to dry:
Work to finish:
This is to be noted:
Tips to use:
Applicable to: Wood, plaster, concrete, creative casting compounds (cured).
Apply with: Brush.
Preparations: The surface to be treated must be dry, free of dust and grease.
Processing of material: Ideally apply at least 2-3 times and allow to dry well between the work steps. This allows the impregnation to develop its full effect.
Time to dry: 40 minutes.
This is to be noted: It is a very watery, odourless impregnation, which can therefore penetrate particularly deeply into the pores.