Proceed as follows:
First of all, decorate the edges of the mould with the concrete Art Liner and let it dry well. Now mix 20 tablespoons of lightweight concrete with water to a creamy mixture. Coat the inside of the mould with a few drops of cooking oil. This makes it easier to remove the concrete object from the mould later
Now fill the mould with the mixed casting compound and press the Terracotta Terracotta pot into the concrete at the desired location. Let everything dry for at least 24 hours. Then remove the resulting concrete plate from the mould. The remains of the concrete Art Liner can be removed carefully with a pointed object. The created relief can now be removed with Handicraft paint be decorated.
Now carefully drill two holes in the plate with a concrete drill bit. Through these two holes you will then make a Cotton cord and knotted at each end. To be able to label it Terracotta pot later, simply enter Board paint on. As soon as the paint has dried, you can write on the board surface with a crayon. The lettering should be changed? No problem at all - just wipe off the old lettering with a wet cloth and the board surface can be re-labelled again and again. Finally, the terracotta pot can be planted and hung up in your garden. 
