Here's how it works
Remove the inserted base from the tray, put the plexiglass cover aside
Prime the tray frame and base white.
Cut the lily motifs from Napkin to create a complete pattern on the base. Remove the unprinted layers of paper and spray the back of the printed layers from behind with spray adhesive.
Combine the parts on the tray bottom and paint them. If a blank is not free of wrinkles or shifted, simply carefully pull it off again and reposition it. Then seal with Napkin varnish .
Wipe over the tray frame with Ink Pads and additionally emphasize the edges.
Pick up a little old pink Handicraft paint with a Bristle brushes , wipe most of it with a kitchen towel and wipe the rest lightly over the frame.
Glue the tip and the pink Ribbon from the ribbon set around the frame below the recessed grips so that the insertion is covered by the tip. Add a small loop at one corner.
Slide the Plexiglas support and the tray back into the frame.