This is how you make the sailing ship wind chime:
First loosen the knots on the sails and remove the sails for easier painting and gluing. Now draw with a Marker different thick lines in blue on one sail, so that it gets stripes
On the other sail a Napkin with Napkin varnish for textiles. To do this, first loosen the top printed layer of your napkin motif and place Napkin varnish, it on Napkin. the desired spot
After drying, both sails are ironed inside out and are washable at 30°C due to the fixation
Jute cord is tied around the lower part of the sail trunk and fixed with Handicraft glue it
Then, eyelets are screwed into the mast at the top and into the boat below the bottom. For hanging up you can now attach a jute cord to the eyelet at the top of the mast
With a 0.3 mm twist drill (for screwdriver or Proxxon) holes are drilled into any different shells and bell cups for hanging. If required, the Bell Cups can be equipped with VBS Handicraft paint be painted. The bars are knotted to the eyelets of the sailboat with a perlon thread. Then the shells and bell cups are provided with the perlon thread and knotted to the eyelets.
