Instructions No. 441
For the upper part of the chandelier bend every second wire of the wire star upwards.
Thread the beads onto these wires in the following order
9 x 3 mm wax bead
1 x 4 mm Acrylic-Pearl,Transparent
3 x 4 mm WhiteAcrylic-Pearl,
1 x 6 mm WhiteAcrylic-Pearl,
1 x glass cut bead, Transparent
1 x 6 mm WhiteAcrylic-Pearl,
3 x 4 mm white Acrylic-Pearl,
2 x wax pearl
After the last Pearl one, bend the wire with the jewellery pliers to the side at right angles and roll it up to the eyelet
Connect all upward bent wires directly when bending the eyelets.
For the arms of the chandelier, thread the beads onto the remaining wires in the following order
10 x wax pearl
1 x 4 mm Acrylic-Pearl,Transparent
3 x wax pearl
1 x 6 mm Acrylic-Pearl,Transparent
1 x 6 mm WhiteAcrylic-Pearl,
1 x 4 mm Acrylic-Pearl,Transparent
3 x wax pearl
1 x drop of wax
2 x wax pearl
1 x pearl cap
1 x pin bead
1 x 4 mm acrylic bead, iridescent
After the last Pearl one, bend the wire with the jewellery pliers to the side at right angles and roll it up to the eyelet
Tip: If the wire is no longer sufficient to bend an eyelet, simply bend the end at right angles.
First bend the wires upwards, then bend them downwards and at the wax drop sharply upwards again, so that the candles are vertical.
Thread the other decorations as desired on nylon thread or chain pins and insert.
Thread in chiffon ribbon and stick on small bows.