Firstly, protect your workstation with a handicraft mat.
Then mix Raysin and water to form a creamy mixture. Follow the instructions on the pack!
280 ml water + 1 kg powder = 650 ml casting compound (1x water + 3.5x powder)
Carefully pour the mixture into the mould. Tap the filled mould lightly on the surface several times so that air bubbles rise. After approx. 1 hour, you can carefully remove the casts from the mould. Leave them to air dry for a while. You can sand the edges smooth with sandpaper. The casting moulds must be cleaned thoroughly after use!
Place the lid of the tin on the napkin motif and trace the edges. Cut the napkins to size and peel off the top layer of the motif. Place it on the lid and apply the napkin varnish with the brush. Start in the centre and work your way outwards. If the napkin sticks out at the edge, simply cut it off with silhouette scissors.
Tip: If your stick candle is too large in diameter, you can sharpen it with a candle sharpener. To hold the candle firmly in place, place a small wax sticker in the base of the mould!
