This is how the rabbits are moulded:
For the "bunny" silicone mould, mix 3 tablespoons of Raysin with water to form a creamy mixture. Carefully pour into the mould. Tap the filled mould lightly on the surface several times to make air bubbles rise. Remove from the mould after approx. 3 hours and allow to dry thoroughly.
The black Raysin is mixed in the same way as described above. The full mould must be thoroughly cleaned after use!
Once all the bunnies have dried through, the areas to be gilded can be coated with the pasty gold leaf priming milk. Leave to dry for approx. 1 hour. Then apply the leaf metal with a dry brush.