For the pretty concrete trailers, first mix the concrete according to the
instructions on the packaging. The consistency should be somewhat firmer to prevent the relief insert from slipping. Before the resulting concrete mass is filled into the
casting moulds, these should be
greasedwith a little household oil so that the cast concrete mould can then be easily loosened. Now place the
relief inlays inside the casting moulds (the mirror-inverted relief now points upwards)
Tip: For personal messages you can
use the concrete art liner. This is applied to the inner surface of the casting mould and dries out like a rubber within 2-3 hours. After the
casting mould has been filled
with concrete and hardened, the rubber-like latex compound is removed from the cavities and the concrete mould with a pointed object
Let the
concrete mass dry for at least 24 hours. Finally, use a
napkin brush to remove some
Napkin varnish applied to the concrete trailers to seal them. This gives the trailers an additional special shine.
Finally, tie cotton cords to the finished tags at only and close the filled gift bags.