Cutlery bag:
First of all, you start by cutting the individual components. You will need two cuttings of the pocket, three cuttings of the back (two with cover fabrics and one fleece line cutting), as well as the cuttings of the heartApplicationand the decorative strip (13 cm x 4 cm).
Next, iron a back piece with the fleece on the left side of the fabric. To prevent the iron from sticking, place a piece of baking paper in between.
Fold the decorative strip in half lengthwise and iron. Then fold each half again to the middle fold and iron. The decorative strip is now finished.
Now fold both pocket blanks left to left. At the upper edge, place the decorative strip so that both edges of the fabric are enclosed. Then fix it with Pins and topstitch it with short edges.
Next, fold the fabrics in the following way: place the reinforced piece of fabric with the right side facing upwards. Place the pocket on top of it and finally the other back piece with the right side down. Fix everything with Needles and topstitch all around except for the turning opening at the top (approx. 8 cm).
Now cut the corners with the scissors. Turn the fabric and work out the corners well
Then fold the seam allowances of the turning opening inwards and iron the fabric well again. Then topstitch all around with a narrow edge and close the turning opening.
Then decorate the front pocket with the heartApplication, the button and the crochet flower.